Pin Out
Connector reference for the Studica Servo Manager.
Servo Manager connector locations and callouts. See table below for what each numbered callout does.
| Callout | Name | What it’s for | Notes |
|---|---|---|---|
| 1 | Main Power Input | Primary power input to the Servo Manager | Power input for low current servos |
| 2 | Main High Power Input | Primary high power input to the Servo Manager | For when the servos need large current |
| 3 | Status LED | Status Information | — |
| 4 | Range Selection | Changing the PWM output range | Select the range that matches the servo |
| 5 | Control Selection | Controls the servo modes and programming behaviors | Main buttons for manager applications |
| 6 | Knob | Control the servos full range | Turn the knob to adjust angle or speed |
| 7 | USB | Communication with PC | For firmware updates and PC software control |
| 8 | 4 Digit Display | Displays Mode and Sensor Data | Provides a quick reference |
| 9 | Low Current Servo Output | Plug standard Studica Servos into here | 3-Pin Molex SL |
| 10 | High Current Servo Output | Plug bigger Servos into here | MR30 |